Specifications; General Specifications - Yamaha MX200-12 Bedienungsanleitung

Specifications

General specifications

Maximum output level
Total harmonic distortion
Frequency response
Hum and noise
(Average, Rs=150Ω)
(Measured with DIN AUDIO)
Maximum voltage gain
Crosstalk at 1kHz
Gain control (input channel)
Pad switch (input channel)
Input channel equalization
LED meters
Channel peak indicators
Phantom power
Power supply/Power consumption
US and Canadian model
General model
British model
+24dB (STEREO L/R) @600Ω, 0.5% THD at 1kHz
+24dB (MONO OUT) @600Ω, 0.5% THD at 1kHz
+20dB (AUX SEND) @600Ω, 0.5% THD at 1kHz
< 0.1% @+14dB 20Hz–20kHz
(ST L/R, MONO, AUX SEND @600Ω)
20Hz–20kHz +1dB, –2dB
(ST L/R, MONO, AUX SEND @600Ω)
–127dB equivalent input noise
–95dB residual output noise (STEREO L/R, MONO)
–95dB residual output noise (AUX SEND 1–4)
–88dB (STEREO, MONO)
–63dB (67dB S/N) (STEREO, MONO)
–78dB (AUX SEND 1–4)
–63dB (67dB S/N) (AUX SEND 1–4)
84dB CH IN to STEREO OUT
84dB CH IN to MONO OUT
80dB CH IN to AUX SEND 1, 2
90dB CH IN to AUX SEND 3, 4
16dB AUX RETURN 1, 2 to STEREO OUT
16dB AUX RETURN 1, 2 to AUX SEND 1, 2
28dB TAPE In 1, 2 to STEREO OUT
–70dB between input channels
–70dB between output channels
44dB variable (–60– –16dB)
0/20dB
±15dB maximum boost or cut
HIGH: 12kHz shelving
MID: 2.5kHz peaking
LOW: 80Hz shelving
* Turnover/rolloff frequencies: located 3dB below maximum boost/cut
10-segment LED × 4
POWER (–∞)
STEREO L/AUX SEND 1 (switchable)
STEREO R/AUX SEND 2 (switchable)
MONO/AUX SEND 3 (switchable)
PFL or AFL/AUX SEND 4 (switchable)
An indicator for each channel turns on when the pre-channel fader signal is 3dB below clipping.
+48V, DC
MX200-8 120V AC 60Hz 45W,
MX200-16 120V AC 60Hz 65W,
MX200-8 230V AC 50Hz 45W,
MX200-16 230V AC 50Hz 65W,
MX200-8 240V AC 50Hz 45W,
MX200-16 240V AC 50Hz 65W,
Master fader at nominal level, and all channel
assign switches off.
Master fader and one channel fader at nomi-
nal level.
AUX SEND master fader at nominal level, and
all channel assign switches off.
AUX SEND master fader and one channel
AUX at nominal level.
MX200-12 120V AC 60Hz 55W
MX200-24 120V AC 60Hz 80W
MX200-12 230V AC 50Hz 55W
MX200-24 230V AC 50Hz 80W
MX200-12 240V AC 50Hz 55W
MX200-24 240V AC 50Hz 80W
9