Yamaha MX200-12 Bedienungsanleitung Seite 7

<HIGH>
This knob is a high frequency equalizer that provides
12kHz shelving equalization of the signal input at AUX
RETURN.
2BAND
EQ
L
AUX RETURN
1 +4dB
2BAND
EQ
R
9 REC OUT control
This knob adjusts the output level of the REC OUT jacks
(connector 5) connected to a tape deck, etc.
0 TAPE IN control
This knob adjusts the monitor volume of a tape deck etc.
connected to the TAPE IN jacks.
A PHONES control
This knob adjusts the volume of a set of headphones con-
nected to the headphone jack (PHONES).
B PHONES jack
Connect the headpones here.
You can monitor the following signals:
— Signals available for monitoring —
• The main signal output to the ST OUT jacks (Turn off
all PFL and AFL switches.)
INV
C METER SELECT switch and meter section
INV
LEVEL
SUM
AUX 1
D PHANTOM indicator
E PFL indicator
SUM INV
SUM INV
ON
REC OUT
SUM
INV
ON
(+V)
AFL
SUM
(+V)
(ST OUT)
AFL
(METER)
SUM INV
PFL
PHONES
• The signals input to each input channel and processed
through the 3-band EQ and the INPUT CH INSERT I/
O jack (Turn on a channel PFL switch.)
• The signal output to MONO OUT (Turn on the MONO
OUT AFL switch.)
• The AUX signals output from each AUX SEND 1–4
jack (Turn on an AUX SEND 1–4 AFL switch.)
The meters are dual-function LED meters that indicate
signal levels as selected by the METER SELECT switch.
<When METER SELECT is OFF>
• STEREO L,R ...... displays the output levels of the
STEREO OUT jacks.
• MONO OUT level ...... displays the output level of the
MONO OUT jack.
• PFL/AFL level ...... displays the input level of the
channel whose PFL switch is on, or the output level of
the ST, MONO OUT, or AUX SEND jack whose AFL
switch (master control section 4, 6) is on.
<When METER SELECT is ON>
• AUX SEND 1–4 ...... displays the level of the AUX sig-
nals output to the AUX SEND 1–4 jacks.
This indicator will be lit when the PHANTOM switch (rear
panel 2) is on.
This indicator will be lit when any of the channel PFL
switches (channel control section 0) is on.
At this time, the PFL/AFL meter in the meter section will
indicate the level of the channel whose PFL switch is on.
(METER)
L
STEREO OUT
+4dB
R
(PHONES)
L
REC OUT
-10dBv
R
(METER)
MONO OUT
+4dB
(METER)
INV
AUX SEND
1-4 +4dB
PHONES
5