Overview; Assembly Guide - Ruris R-Power Ge9000Rc Ats Handbuch

EN
Fuse
Frame type
Transport wheels
Net weight with accessories
1. Fuel cap
2. Voltmeter
3. Single-phase socket
4. Three-phase socket
5. Battery
6. Wheel
7. On/OFF contact
8. Starter
9. Air filter
The images are for informational purposes only, the supplier reserves the right to make structural and
functional changes to the equipment presented in this manual.
Grounding terminal
The Power generator ground terminal is connected to the Power generator frame, non-conductive metal parts of
the Power generator, and the ground terminals of each outlet.
Before using the grounding terminal, consult a qualified electrical inspector or local agency having jurisdiction for
local codes or ordinances that apply to Power generator use.
1. Install the transport handles (fig. 1)
2. Mount the axle and transport wheels on the Power generator frame (fig. 2 and 3)
3. Fix the Power generator support legs using the screws provided (fig. 4).
4. Make sure the battery terminals are
4

4. OVERVIEW

4.1 ASSEMBLY GUIDE

Standard equipment
Industrial
YES
91.2 kg