Oil Filling; Fuel And Oil Supply - Ruris R-Power Ge9000Rc Ats Handbuch

EN

5.1 Oil filling

Engine oil is a major factor affecting engine performance and lifespan. Non-detergent oils and two-stroke engine
oil will damage the engine and are not recommended.
Check the oil level BEFORE EACH USE, positioning the Power generator on a flat surface and with the engine
stopped.
ATTENTION! The Power generator is not delivered with oil in the engine.
Fill the engine crankcase with RURIS 4T-MAX engine oil or an oil with API classification: CI-4/SL or higher, up to
the filler neck (see technical data table).
In the cold season of the year, it is recommended to use RURIS 4T-
WINTER GT SAE 10W-40 API: CI-4/SL oil.
1. Remove the oil filter cover and clean the dipstick.
2. Check the oil level by inserting the dipstick into the filler hole
without screwing it in.
3. If the level is low, fill to the top of the filler hole with the
recommended oil.
4. Reposition the oil dipstick again.
5.2 Fueling
1. Remove the fuel tank cap and check the level.
5

5. FUEL AND OIL SUPPLY