GB
MT
gether to make it easier to work in confined
spaces.
The circulating saw chain is guided over a
blade bar (guide rail). The tool has a quick-
stop chain brake. An automatic oil system
ensures continuous chain lubrication. The
tool also features a 2-in-1 rotary wheel for
chain tension. The tool is provided with vari-
ous protective devices to protect the user.
The tool can be coupled with the Parkside
app.
Please refer to the descriptions below for in-
formation on how the operating elements
work.
Technical data
Cordless pruning saw ....... PPAKS 40-Li B2
Engine voltage U ................40 V ⎓ ; (2x 20 V)
Engine current I ...................................... 16 A
Chain speed v
................................... 13 m/s
0
Chain speed v
...............................16 m/s
max
Weight (without blade bar, chain, encasing,
oil and batteries) ................................ 2.10 kg
Tank capacity ....................... 190 cm
Blade bar ............. M1431246-1041TL (Trilink)
– Blade bar type .......................................12"
– Blade bar length .............35.0 cm (350 mm)
– Cutting length .................28.5 cm (285 mm)
Saw chain ........................CL14346TL (Trilink)
– Chain pitch .......................... 9.525 mm (⅜")
– Number of driving elements ....................46
– Drive link thickness ............1.1 mm (0.043")
Chain sprocket pitch .............. 9.525 mm (⅜")
–Number of teeth (chain sprocket) .............. 7
Temperature ................................. max. 50 °C
– Operation ......................................4 - 50 °C
– Storage ....................................... 15 - 25 °C
Sound pressure level (L
......................................... 92.6 dB; K
Sound power level (L
WA
– Guaranteed ......................................100 dB
– Measured ................97.8 dB; K
Vibration (a
)
h
– Front handle .............4.37 m/s²; K=1.5 m/s²
– Rear handle ..............3.72 m/s²; K=1.5 m/s²
Type of battery ......................................Li-Ion
PARKSIDE Performance Smart battery
Smart PAPS 204 A1/Smart PAPS 208 A1
– Operating frequency/Frequency band
......................................... 2400 - 2483.5 MHz
30
3
(0.19 l)
)
pA
=3 dB
pA
)
=2.73 dB
WA
– transmitted power ....................... ≤ 20 dBm
Levels of noise and vibration were determ-
ined according to the standards and regula-
tions in the declaration of conformity.
The specified total vibration value was de-
termined according to the following stand-
ard: ISO 22867:2021
The specified noise emission values were
determined in accordance with the following
standard: ISO 22868:2021
The values have been determined accord-
ing to a standardised test procedure and can
be used to compare one tool with another.
The specified total vibration value and the
stated specified noise emission value can
also be used for a provisional assessment of
the load.
WARNING! The vibration and noise emis-
sions may deviate from the specified val-
ues during actual use of the device, depend-
ing on how the device is being used. Safety
measures for the protection of the operat-
or are to be determined that are based on
an estimate of the actual vibration load un-
der the real operating conditions (for this, all
parts of the operating cycle are to be taken
into account, for example, times in which the
device is turned off, and those during which
it is turned on but running without a load).
X 20 V TEAM
The device is part of the X 20 V TEAM
series and can be operated with batteries
of the X 20 V TEAM series. Batteries of the
X 20 V TEAM series may only be charged
using chargers of the X 20 V TEAM series.
We recommend that you operate this
appliance with the following batteries
only: PAP 20 A1, PAP 20 A3, PAP 20 B1,
PAP 20 B3, Smart PAPS 204 A1,
Smart PAPS 208 A1
Use of the device with the following batteries
is prohibited: Smart PAPS 2012 A1
We recommend charging these batteries
with the following chargers: PLG 20 A3,
PLG 20 A4, PLG 20 C1, PLG 20 C2,
PLG 20 C3, PDSLG 20 A1, PDSLG 20 B1,
PLG 201 A1, Smart PLGS 2012 A1
Rechargeable battery and charger technical
data: See separate manual.