Master F26 Bedienungsanleitung Seite 64

E04 Over voltage protection
Voltage shortage protection
E05
Over load protection
E06
No signal
E07
PCB over heat protection
E08
Motor phase loss error
E10
Motor over heat protection
E11
No signal
E12/E13/E1
5
Safety key off
E14
Turn off power and restart
Check input voltage
Change new pcb
Check input voltage
Change new pcb
Adjust running belt tension, or add oil
Check motor has smell or not,change it
if has.
Check pcb has smell or not, change it if
has.
Re-connect signal wire or change new
signal wire
Change new computer
Change new pcb
Turn off power for
start
Change new pcb
Re-connect motor wire or change new
motor wire
Turn off power and re-start
Change new motor
Change new pcb
Turn off power for
start
Change new pcb
Re-connect signal wire or change new
signal wire
Change new computer
Change new pcb
Put the safety key on console
Re-connect connecting wire or change
new safety key sensor
Re-connect signal wire or change new
signal wire
64
a while and re-
a while and re-
EN