Safety Guide - Vevor 4040Pro Bedienungsanleitung

Please be careful when using your CNC machine. This machine is an
electricaldevice with moving parts and dangerous areas.
1. The CNC Machine are for Indoor Use Only.
2. You must be 18 years or older to operate this machine, unless s upervised by a knowledgeable adult
familiar with the machine
3. Wear gloves to installthe machine,Wear the proper Personal Protection Equipment when using
machines (Safety Glasses etc.).
4. Always place the CNC Machine on a stable surface.
5. The CNc Machine is supplied with switchable Power Supply 220VAC or 110VAc. Never use a diferent
power supply; it may cause malfunctions or damage to the machine.
6. The 4040 CNC utilizes a high amp power supply. lt is recommended that you do not plug the CNC
Router into an extension cord, or power strip as it may damage the machine. (Need final confirmation)
7. Ensure the Emergency stop button is easily accessible at all times.
8. Never disassemble the Power Supply or Electrical Components.
9. DO NOT TOUCH the machine spindle, or place any body part near the working area when the
machine is operating. Serious injury may occur.
10. DO NOT leave children unsupervised with the CNC Machine even when it's not operating.
lnjury may occur.
11. DO NOT leave the machine unattended while it's operating.
12. Ensure your CNC Machine is in a well ventilated area.
Some Materials may discharge smoke or fumes during operation.
Safety Guide
2