Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3f
3g
3h
3j
Pull off sufficient lap and diagonal belt (approx.600-900mm). Open the lock-off
arm on the side opposite the seat belt buckle. Pull back the child seat cover to
reveal the crotch strap. Feed the belt through the lock-off belt guide and seat
shell slot
(dia 3f)
on to the top face of the seat base, behind the crotch strap
(inset)
and down through the slot on the other side of the child seat.
Open the other lock-off arm , feed the seat belt under the lock-off arm and
attach the tongue into the buckle
3i
Finally tighten the tether straps by pulling the loose ends downwards
until the footprop touches the floor. The footprop must rest on a solid floor - not
on lids of storage boxes or similar.
Once firmly strapped in, test the child seat by trying to move it back and forth
and side to side. If it seems loose, you must re-install until firmly installed.
DO NOT
rest the back of the child seat against the driver or front passenger
seats.
(dia
3g).
Pull all of the seat belt slack through
the child seat ensuring the seat belt
is not twisted
(dia
is as tight as possible, close the lock-
off arms on
BOTH
ensuring that they click into place.
If the buckle now lies in the position
marked as wrong with a
seat belt cannot be correctly tightened
(dia
3i), try another seating position in
the car.
0 - 25 kg
3h). When the belt
sides of the seat
and the
(dia 3j)
33
Werbung
