Operation; Connecting The Data Logger To Your Pc; System Requirements For Pc Software; Software Installation - Pce Instruments Pce-Vdl 16L Benutzerhandbuch

5

Operation

5.1
To be able to make the different sensor settings in the software, connect the data cable to the PC
and to the Micro USB connection of the data logger. The Charge and USB LEDs glow. When the
battery is charged, the CHARGE LED will stop glowing automatically.
Press
5.2
•
•
•
•
•
•
•
•
Recommended: Operating system (64 Bit) Windows 7 or higher
At least 8 GB main memory (the more, the better)
5.3
Please run the " Setup PCE-VDL X.exe " and follow the instructions of the setup.
Downloaded from www.Manualslib.com

Connecting the data logger to your PC

to turn on/off the data logger.

System requirements for PC software

Operating system Windows XP SP3 or higher
USB port (2.0 or higher)
An installed .NET framework 4.0
A minimum resolution of 800x600 pixels
Optional: a printer
Processor with 1 GHz
4 GB RAM
A data logger ("PCE-VDL 16I" or "PCE-VDL 24I")

Software installation

manuals search engine
© PCE Instruments
35