„Mem-Edit" - Overwrite A Saved Measured Value - Gossen MetraWatt SECULIFE itc Bedienungsanleitung

„Mem-Edit" – Overwrite a Saved Measured Value
4.4.3
Hold
Mem
10
The SECULIFE IT offers the function „Mem Edit" for correcting a
stored value in the memory. Measure again, press the Hold key
and the new value is logged in. Then, by pressing one of the
range keys, you can scroll through the memory.
At the memory space to be
corrected press down the key Mem.
Then the display shows the saved
value for a few seconds alternating
with the number of the memory
space. Subsequently the
SECULIFE IT will return to
measuring mode.
GMC-I Messtechnik GmbH