Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4.4
Memory Functions
In addition to the display buffer storage, the SECULIFE
for up to 100 measured values.
This function allows the user to make several measurements in the field and then to view them later. The
data stored in the memory will be maintained, even if the meter is turned off or if the battery is changed.
„HOLD" - Display Hold Function
4.4.1
The SECULIFE
IT
has been equipped with a Display HOLD Function in order to enable you to make
measurements in very low light conditions and to read them out later in brighter light conditions.
The latest measurement will be buffer-stored in the display by striking the HOLD key. Then "HOLD" will
appear in the display. Pressing down the HOLD key again will prompt the SECULIFE
measuring function.
The function HOLD is the basic function for all the memory functions.
8
IT
has also been provided with a memory space
Hold
IT
to return to the
GMC-I Messtechnik GmbH
Werbung
Kapitel
Inhaltsverzeichnis
