Inhaltsverzeichnis
Werbung
-> ENTER ->
-> ENTER ->
<- MODE
<- MODE
MUSIC CONTROL MODE
Press the MODE button repeatedly until the LED indicator for the Music control mode (SOUND) lights up and displays "Sou". Now press ENTER to
activate the Music control mode and display the currently set program (SouM = combination of Derby and strobe effect, SouP = Derby effect, SouF
= strobe effect). One of the 3 sound programs can now be selected by using the UP and DOWN buttons. To adjust the sensitivity with which the
programs react to sounds (bass pulses), use the Nr 11 controller as desired. When turned to the left, the sensitivity is lowered, when turned to the
right, it is increased (left stop = microphone disabled)
-> ENTER ->
-> ENTER ->
<- MODE
<- MODE
SLAVE MODE
Press the MODE button repeatedly until the LED indicator for the Slave mode (SLAVE) lights up and displays "SLAV". If no control signal is present,
the characters in the display flash; the flashing stops as soon as a control signal is present. Connect the slave and the master unit (same model) us-
ing a DMX cable (Master = DMX OUT, Slave = DMX IN) and activate one of the standalone modes (automatic control or music control) on the master
unit. Now the slave unit follows the master unit.
STATIC COLOURS MODE
The static colours mode offers the possibility of adjusting the brightness for each of the 4 colour LEDs of the Derby effect and to also activate a
strobe effect. The LED rotation is not available in this mode. Press the MODE button repeatedly until "CoLo" appears on the display and confirm by
pressing ENTER. Now, the brightness value for the red LED can be adjusted as desired between r000 and r255 by using the UP and DOWN buttons.
Confirm again with ENTER. After you have set the brightness value for the green (G000 - G255), blue (b000 - b255) and white LED (W000 - W255)
in the same way, the stroboscope effect can now be activated (S 00 = strobe effect is disabled, S 01 = slowest flash speed, S = 99 fastest flash
speed). Confirm the input with ENTER.
-> ENTER ->
<- MODE
UP/DOWN
CHASE AND STROBE PROGRAMS
For the 16 white strobe lights, 18 different chase and strobe programs are available, whose speed can also be adjusted. Press the MODE button
repeatedly until "Str" appears on the display and confirm by pressing ENTER to activate the mode (display switches to "Stro"). Press ENTER again
to select one of the 18 programs St01 to St18 by using the UP and DOWN buttons. Now use the UP and DOWN buttons to select the desired running
speed of the programs between S 00 and S 99 (St18 = full on). Confirm the input with ENTER.
-> ENTER ->
<- MODE
-> ENTER ->
-> ENTER ->
UP/DOWN
UP/DOWN
-> ENTER ->
-> ENTER ->
<- MODE
<- MODE
UP/DOWN
-> ENTER ->
<- MODE
UP/DOWN
UP/DOWN
<- MODE
<- MODE
-> ENTER ->
<- MODE
UP/DOWN
-> ENTER ->
<- MODE
UP/DOWN
-> ENTER
<- MODE
-> ENTER ->
<- MODE
UP/DOWN
UP/DOWN
19
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
