Dismantling And Recycling - Formula Air Rva-X Serie Wartungshandbuch

Problem
 The rotary valve has
issues after prolonged
standstill period
If the above does not help, please contact your supplier.
10.

Dismantling and recycling

When dismantling a unit, be sure to keep in mind the following important information :

As the unit is dismantled, set aside all still functioning parts to re-use them on another unit.
 You should always separate the different materials depending on their type: iron, rubber, oils, greases, etc.

Recyclable parts must be disposed of in the appropriate containers or brought to a local recycling company.
The rubbish must be collected in special containers with appropriate labels and disposed of in compliance with the
national laws and/or local legislations in force.
CAUTION !
It is strictly forbidden to dispose of toxic wastes in municipal sewerage and drain systems. This concerns all oils,
greases, and other toxic materials in liquid or solid form.
19
User manual | RVA Rotary valves ATEX
www.formula-air. com
Probable cause
 Rubber blades are stuck
 Rubber blades are hard/cracked
 The gear is making strange
noises/gripped
 The motor is making strange
noises/gripped
 Bearing is making strange noises/gripped
Possible solution
 Replace rubber blades
 Refer to manufacturer's manual
 Refer to manufacturer's manual
 Grease or replace the bearing