EMA Components Topas Pro/Rubin Pro/Rubin Pro D-III series safes data sheet
Name
Class C structure-borne sound
detector
Door/body
Magnetic contact class C
Door contact
Bolt switching contact class C *
(Control via switch plate)
Breakaway detector class C
Distributor class C
Door/body
Cable transition, flexible
Important information about the bolt switching contact/lock bolt contact:
* The lock bolt position is monitored by an external bolt switching contact of VdS class C.
The following switches are approved: Link type 100 13 30 A (G193081) and Schitronic type 035501 (G186105). The external switches are
controlled by switch plates. Depending on the lock version, switch plate 1, switch plate 2 or switch plate 3 can be used.
Switch plate 1: Two M4 front holes on the lock bolt. Format item P1014087
Switch plate 2: One M6 hole on the lock bolt. Format item P1013359
Switch plate 3: Bolt mechanism position monitoring on lower bascule bar for Swingbolt or Rotobolt high-security locks.
Depending on the lock version, further alarm components (e.g. alarm boxes, locking or switching devices) may be required or preferred in the secured area of the
door. The installed components must all comply with VdS class C and be provided with a VdS identification number.
If alarm components are to be installed at a later date, the necessary dismantling/assembly work on the bolt mechanism must be carried out
by an authorised service technician, and the wiring must be carried out in consultation between the burglar alarm system installer and the service technician.
11.07.2024 / A1014188
Operating and mounting instructions
Rubin Pro - Safe
Manufacturer
Vanderbilt International (IRL) Ltd.
Link GmbH
Link GmbH
Schitronic Electronic Systems V. Dumps
dormakaba Germany GmbH
Format Tresorbau GmbH & Co.KG
Link GmbH
Link GmbH
Type
VdS id. no.
GM 730
G106008
GM 775
G109013
100 0151 A/A I
G193030
MK 48 S G3
G109044
100 1330 A/32 A
G193081
035 501
G186105
AM 115
G194 032
SKV 10
G107079
300 1020 b
G194056
Hose inner diameter 7mm, 2 end pieces
13
DE/EN/FR/NL
Installation position
Door / inner body
see drawing
Bottom of door / inside
bottom of body
see drawing
Connection cable in the door
below the
Fuse plate
Inner body base, see drawing
Door / inner body bottom
see drawing