R&G RSET32 Montageanleitung Seite 14

Page 14 of 21
INTERRUPTEUR DE FEU STOP
•
Enlever le boulon qui fixe le banjo installé sur l'extrémité du maître-cylindre puis réinsérer le boulon avec
l'interrupteur de feu stop (article 6) en utilisant des rondelles d'étanchéité (article 7), voir photo 18. NOTEZ
QUE VOUS DEVREZ PURGER LE SYSTÈME DE FREINAGE
• Nous recommandons de couper le fil d'origine et d'utiliser des connecteurs (article 8) pour connecter le fil
d'interrupteur de feu stop au fil d'origine, voir photo 19.
FONCTIONNENT CORRECTEMENT AVANT DE PRENDRE LA ROUTE.
Du fait de la complexité du montage et des risques inhérents au système de freinage, nous
recommandons fortement de faire effectuer le montage/ ou la vérification du montage par un
CONSUMER NOTICE
The catalogue description and any exhibition of samples are only broad indications of the Products and R&G may make design changes which do
not diminish their performance or visual appeal and supplying them in such state shall conform to the order. The Buyer acknowledges no
representation or warranty (other than as to title) has been given or will apply to the Products other than those in R&G's order or confirmation
and the Buyer confirms it has chosen the Products as being of merchantable quality and suitable for its particular purposes. Where R&G fits the
Products or undertakes other services it shall exercise reasonable skill and care and rectify any fault free of charge unless the workmanship has
been disturbed. The Buyer is responsible for ensuring that the warranty on the motorcycle is not affected by the fitting of the Products. On return
of any defective Products R&G shall at its option either supply a replacement or refund the purchase money but shall not be liable if the Products
have been modified or used or maintained otherwise than in accordance with R&G's or manufacturer's instructions and good engineering practice
or if the defect arises from accident or neglect. Other than identified above and subject to R&G not limiting its liability for causing death and
personal injury, it shall not be liable for indirect or consequential loss and otherwise its liability shall be limited to the amounts paid by the Buyer
for the Products or the fitting or service concerned. These terms do not affect the Buyer's statutory rights.
Returns must be pre-authorised (if not pre-authorised the return will be rejected). Goods may only be returned direct to us if they were
purchased direct from us (customer must prove if necessary). Otherwise to be returned to original vendor. Goods must be in re-sellable
condition, in the opinion of R&G Racing. All returns are subject to a 25% restocking and handling fee (25% of the gross value exc. P&P – at the
prevailing price at time of purchase). The customer must pay any and all carriage charges. No returns of discontinued products, unless within 14
days of purchase. This policy does not affect your statutory rights and does not refer to faulty goods.
Tel: +44 (0) 420 89007 Fax: +44 (0)
1
Photo 18
mécanicien qualifié
ISSUE 3
R&G RACING RETURNS POLICY (NON-FAULTY GOODS)
Unit , Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
1
420 8730
1
Photo 19
.
VÉRIFIEZ QUE LES FREINS ET LE FEU STOP
.
05/07/2021 (DM)
R&G
www.rg-racing.com Email:
1
RSET32
info@rg-racing.com