R&G RAD0326PRO Montageanleitung

Page 1 of 9 RAD0326PRO
FITTING INSTRUCTIONS FOR RAD0326PRO RADIATOR GUARD
T .
HIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED OVER PAGE
S .
OME PARTS MAY BE SHOWN FOR CLARITY OF INSTRUCTIONS ONLY
D .
O NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT
P .
LEASE READ ALL INSTRUCTIONS BEFORE PROCEEDING
IF IN ANY DOUBT WHEN FITTING OUR PRODUCTS, CONSULT ONE OF OUR
DEALERS OR HAVE FITTED BY A QUALIFIED TECHNICIAN.
P
LEASE NOTE THAT THE WAY THE KIT IS PACKED DOES NOT NECESSARILY REPRESENT THE WAY
.
OF MOUNTING TO THE BIKE
I ,
N THE EVENT OF RUBBER WASHERS BEING USED TO HOLD COMPONENTS ONTO BOLTS
.
THESE RUBBER WASHERS CAN BE THROWN AWAY
DIGITAL COPIES OF THESE INSTRUCTIONS ARE AVAILABLE FROM:
WWW.RG-RACING.COM
R&G
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com