Inhalation; Filling And Sealing The Medication Reservoir - Pari eFlow rapid Gebrauchsanweisung

INHALATION

4
Filling and sealing the
medication reservoir
• Add the quantity of medication pre-
scribed by your doctor to the medication
reservoir:
Caution:
Ensure that the medication is filled no
higher than the upper scale graduation
mark (6 ml). Do not overfill under any
circumstances!
®
eFlow rapid - 03/12
• Close the medication reservoir: Place
the cap (4) on the medication reservoir
so that the slots in the side of the cap are
positioned above the notches in the res-
ervoir. Press gently and turn the cap
clockwise as far as it will go:
4
Note:
The closing mechanism is function-
ing correctly if the cap seal (4a) ris-
es with the turning motion to form a
seal.
4a
• Check that all parts are connected tight-
ly and that the medication reservoir is
sealed. Otherwise nebulisation may be
impaired.
en
47