Pari eFlow rapid Gebrauchsanweisung Seite 49

• Press the aerosol chamber and the
medication reservoir together until the
clip on the reservoir engages in the lock-
ing lug of the aerosol chamber:
Note:
If the button closure does not close,
open the nebuliser handset by
lifting the clip and ensure that the in-
spiratory valve is seated correctly.
Fit the medication cap (4), consisting of
the cap seal with soft sealing collar and
cap:
• Hold the cap (4b) with the small opening
upwards and push the cap seal (4a)
onto the four locking lugs from below
until it snaps audibly into place.
4b
4a
Note:
Check that the soft collar is fully
extended and without creases.
®
eFlow rapid - 03/12
• Attach the expiratory valve (pre-
assembled, 7a) in the slot provided for
that purpose in the mouthpiece (7):
7a
• Insert the mouthpiece (7) with the expir-
atory valve pointing upwards in the con-
nector to the aerosol chamber:
en
7
7
45