Fuses And Cable Cross-Sections - Lenze 8200 motec Montageanleitung

Show/Hide Bookmarks

Fuses and cable cross-sections

Type Type
E82MV551_4B
E82MV751_4B 3/PE AC
E82MV152_4B
E82MV222_4B
1)
Use UL-approved cables, fuses and fuse holders only.
UL fuse: 500 ... 600 V, tripping characteristic "H" or "K5"
2)
Pulse-current or universal-current sensitive earth leakage circuit breaker
Observe national and regional regulations
Please observe the following when using e.l.c.bs.:
E.l.c.bs must only be installed between mains supply and controller.
l
Earth leakage circuit breakers can be activated although not required by
l
– capacitive leakage currents of the cable shields during operation (especially with long,
shielded motor cables),
– simultaneous connection of several controllers to the mains supply.
8200 motec in parallel connection
Type
E82MV551_4B
E82MV751_4B
E82MV152_4B
E82MV222_4B
IMPORTANT IMPORTANT
Observe national and regional regulations
L
mains mains Installation to EN 60204-1
Fuse
M6 A
M6 A
320 ... 550 V; 320 550 V;
M6 A
45 ... 65 Hz 45 ... 65 Hz
M10 A
Mains 1 motec
current
1.8 A
2.4 A
1) 1)
4 kW 4 kW
2)
4 kW 4 kW
3.8 A
5.5 A
The sum of mains currents must not exceed 23mA!
1)
Mains contactor determined by inrush currents.
2)
Mains contactor for operation with mains choke 1.5 mH/24 A (order No.
ELN3-0150H024) or current limitation module E82ZJ004 (max. 20 A/phase).
EDK82MV222 DE/EN/FR 3.0
Electrical installation
Mains connection / brake resistor
E.l.c.b. L1, L2, L3, PE
2
[mm
B6 A 1
B6 A 1
B6 A 1
B10 A 1.5
Mains contactor required for connection of:
2 motec 3 motec
1) 1)
15 kW 15 kW 15 kW 15 kW
2)
5.5 kW 5.5 kW 7.5 kW 7.5 kW
Installation to UL
Fuse L1, L2, L3, PE
] [AWG]
5 A 18
5 A 18
5 A 18
10 A 16
4 motec 5 motec
1) 1) 1) 1)
22 kW 22 kW 22 kW 22 kW
2) 2)
11 kW 11 kW 11 kW 11 kW
4
1)
2)
FI FI
≥ 30 mA ≥ 30 mA
6 motec
1) 1) 1) 1)
22 kW 22 kW
2) 2)
11 kW 11 kW
23