Configuring The Device - Tell 4G.in6.R2 Kurzleitfaden Für Installateure

CONFIGURING THE DEVICE:

Arming/Disarming options:
You can choose from several options the one that best suits your needs in the
Arming/Disarming section of the General menu.
Attention! If you want to arm/disarm the device remotely via the mobile app,
choose the option Remote arming/disarming only!
For further information on arming/disarming, see the Installation and
Application Manual.
Configuring notifications and remote monitoring:
The contact details of CMS (Central monitoring station) servers can be added in
the Reporting channels menu. Beyond entering the name at will, you must set
the receiver's IP address/domain and port number, the communication protocol
you want to use, and the supervision message settings.
The device can also send notification via SMS or voice call. E-mail and Push
notification options are also available. The phone numbers and e-mail addresses
can be added in the Reporting channels menu.
You can change the default priority of reporting to your CMS receivers in the
Notification templates menu. For advanced reporting options (e.g. to report a
specific event with a different priority or to a different receiver) you can create
a new notification template by clicking on the Add new button. Then you
must select the servers you want to use and set their priority, and then select the
given template in the settings of the event you want to use it for.
Configuring IP cameras:
The product can manage access to up to four IP cameras via ONVIF protocol.
They can be added in the IP cameras menu, by entering the URLs of the
cameras. You can enter either stream or snapshot URLs, and the mobile
application will display the camera images accordingly.
To extract the URL from your IP camera, we suggest using our IP camera
detector software designed for this purpose. The software is available on our
website in the downloads, on the Smart Module MINI – DIN rail product page.
6