tell 4G.IN6.R2 Kurzleitfaden Für Installateure Seite 5

Smart Module MINI – Quick Guide
If you want to lock the SIM card with a PIN code, enter the PIN code of the SIM
card in the SIM settings section, and enable PIN code request on the SIM card.
In case of using a SIM card that uses a private APN, accessing the cloud server
IP address in the given APN must be specifically enabled at the mobile service
provider.
The cloud contact details are the following:
Server address: 54.75.242.103
If the Cloud usage option is enabled, the device can be accessed at any time
via the cloud. Cloud usage must be enabled if you want to use the mobile
application. Otherwise, the device will only connect to the cloud upon a request
sent via SMS to the phone number of the SIM card installed in the device:
 CONNECT,PWD=device password#
(e.g.  CONNECT,PWD=1234#)
After the connection has been established successfully, the device sends
a response SMS, which contains the server contact details and the Device ID.
Registering the device identifier:
The device can be identified and accessed remotely based on its unique device
identifier. You can read and copy the device ID to clipboard in the Status
monitoring menu.
You can store the device contact details (name, device identifier, comments)
using the Add new
to easily connect to the device remotely.
Remote access via cloud service
 Open the Smart Module MINI programming software.
 Click on the Connection type menu and select the Cloud
 If you have already registered the contact details of the device in the Device
register menu, select the device you want to connect to in the Device name
drop-down menu. Otherwise, select the server from the Cloud drop-down
menu, enter the Device ID of the device and the Device password.
 Click on the Connect
For further connection options, see the Installation and Application Manual of
the product.
-> Chapter 4 of the Installation and Application Manual.
Server port: 2020
button in the Device register menu, which enables you
button.
5
:
option.