General Safety Information - Sentiotec Ihs 1 Aufbauanleitung / Betriebsanleitung

Assembling Instructions for Specialist Staff Only
Dear Assembler
• Assembling may be performed by an electrician or
a comparatively qualified person only.
• Read the assembling instructions carefully, before
assembling the infrared control unit. By doing so you
will utilize all the benefits of the device and you will
prevent damages.
• Should particular problems occur, which are not suf-
ficiently dealt with in these assembling instructions,
to protect yourself, turn to your supplier.
• Unauthorized changes or modifications of the infra-
red control unit are not permitted due to safety re-
asons.
• We reserve the right to make technical changes.
Meaning of characters in the assembling instruc-
tions:
WARNING:
if not observed you may be subject to severe or even
deadly injury.
CAUTION:
if not observed you may be subject to medium to
light injuries or materials may be damaged.
NOTE:
gives advice concerning applications and useful in-
formation.
Disposal
Keep these assembling instructions near the infra-
red control unit for quick and easy reference regar-
ding important information for safety and opera-
tion.

General safety information

Follow the special safety information of each chap-
ter.
As directed use:
• The infrared control unit is used to control the inside
temperature:
- for the infrared foil heating systems in the range of
30 - 50 degrees Celsius,
- for the infrared heating element systems in the range
of 30 - 70 degrees Celsius.
• You are only allowed to use the infrared control unit
for controlling 3 heating circuits with a maximum
heating capacity of 1,2 kW per heating circuit.
The mains connection line must consist of 3 x 2,5².
• Only mount and operate the power supply unit with
the infrared control included in standard delivery.
Disposal:
• Please dispose of packaging materials in accordan-
ce with applicable disposal regulations.
11