Sms >> Passive; 10. Settings; Station Name - Condor Sim800F Betriebs Und Installationsanleitung

_________________________________________________________________________________
9.2.4 SMS >> PASSIVE
Connection type
Functional description
Phone number
Remote
acknowledgement

10. Settings

10.1

Station name

This menu item is used to enter a station name.
The station name is displayed in the message to indicate the individual control unit. The station name
can have max. 12 characters,
If the station name is entered, it will also be displayed in the control unit's maintenance menu.
Additional function notes are described in Section 11.3 of the electric control unit's manual.
Station name
CONTROLLER 1
This is a passive mobile phone number, to which you cannot send
messages.
If the connection type SMS >> Fax and/or SMS >> E-mail is selected for
sending messages, a mobile phone number must be entered here to enable
an SMS or call acknowledgement to be transmitted.
Additional function notes are described in Section 10.2 [Return call within].
Entry of the phone number as described in Section 9.2.1 [SMS >> Mobile
phone].
If this function is selected, previously defined faults can be acknowledged
remotely by means of a reply SMS. For this, please observe Section 11.4 in
the electric control unit's manual.
Remote acknowledgement  off
Settings
Page 20
Operating and installation manual for GSM mode
Remote acknowledgement  on
903 501 - V1.0