Safety Instructions For Electric Control Unit; Safety Instructions For Gsm Modem - Condor Sim800F Betriebs Und Installationsanleitung

_________________________________________________________________________________
1.

Safety instructions for electric control unit

The safety instructions of the associated electric control unit and its operating manual must be
observed regarding:








2.

Safety instructions for GSM modem

The GSM modem complies with all generally valid GSM standards. When using the GSM
transceiver unit, the safety precautions for mobile telephony must be observed:
Explosive and/or flammable gas mixtures can be ignited electromagnetically
by GSM equipment.
The modem may only be operated in aircraft and hospitals if this is permitted
and harmless.
The modem may not be operated in vehicles, except if a special permit has
been issued for the device.
Use of the GSM modem under the above conditions must be tested and/or excluded by
professional means.
Before commissioning the modem, you must inquire about possible
influences it might have on your existing technical equipment.
The manufacturer supplies a product that is intended to be integrated in a plant or system. In
accordance with the EU Directive, this product has been checked for compliance with the
standards and guidelines listed in the manufacturer's declaration. Nonetheless, the GSM
modem's electromagnetic behaviour depends on the installation and ambient conditions.
The GSM modem's electromagnetic behaviour depends on the installation
and ambient conditions, which are not under the control of the manufacturer.
Therefore, the manufacturer accepts no liability for such behaviour.
Due to the emitted HF radiation, a GSM device may only be operated with a
suitable GSM antenna for the corresponding frequency range. The antenna
cable may not be damaged.
Personnel qualifications
Risks in case of non-observance of these safety warnings
Safety awareness at work
Safety warnings for the operating company / operator
Safety warnings for installation and maintenance work
Unauthorised modification and production of spare parts
Impermissible operating modes
Use in explosion-hazarded areas must be strictly observed!
Page 2
Operating and installation manual for GSM mode
903 501 - V1.0