_________________________________________________________________________________
5.
Inserting the SIM card
Make sure that the SIM card has been activated for the intended service.
The integral SIM card reader is designed for 3V SIM cards in the mini format
(25x15x0.76 mm). Corresponding adapters must be used for micro and nano card formats.
Push the SIM card into the card slot at the rear of the GSM modem.
While inserting the card, make sure that the gold-plated contacts face downwards to the circuit
board, and the cut corner to the right (Fig. 1).
Operating and installation manual for GSM mode
Page 4
903 501 - V1.0
Fig. 1
Fig. 2