Rotel RB-991 Bedienungsanleitung Seite 2

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
NOT REMOVE COVER. NO USER-SERVICEABLE
REFER SERVICING TO QUALIFIED
APPLICABLE FOR USA, CANADA
APPROVED FOR TO THE USAGE
CAUTION: TO PREVENT ELECTRIC
OF PLUG TO WIDE SLOT. INSERT
ATTENTION: POUR EViTER LES CHOCS
INTRODUIRE LA LAME LA PLUS LARGE
DANS LA BORNE CORRESPONDANTE
POUSSER JUSQU AU FOND.
This symbol is to alert the user to the
presence of uninsulated
voltages inside the product's enclosure
that may constitute a risk of electric shock.
This symbol is to alert the user to important
operating and maintenance (service)
instructions in this
accompanying
SHOCK, DO
PARTS INSIDE.
SERVICE PERSONNEL.
OR WHERE
SHOCK, MATCH WIDE BLADE
FULLY.
ELECTRIQUES,
DE LA FICHE
DE LA PRISE ET
dangerous
manual and literature
the product.
WARNING:
There are no user serviceable parts inside. Refer all servicing to
qualified service personnel.
WARNING:
To reduce the risk of fire or electric shock, do not expose the
RB-991 to moisture or water. Do not allow foreign objects to get
into the enclosure. If the unit is exposed to moisture,
object gets into the enclosure,
cord from the wall. Take the unit to a qualified service person for
inspection and necessary repairs.
Read all the instructions before connecting or operating the RB-991.Keep this
manual so you can refer to these safety instructions.
Heedall warningsandsafety informationin theseinstructionsandonthe
product itself. Follow all operating instructions.
Clean the RB-991only with a dry cloth or a vacuum cleaner.
Keeptheventilationinletsonthe unit unobstructed. F orexample, d onotplace
theunit ona bed,sofa,rug, or similarsurfacethat couldblockthe ventilation
slots.Ifthe RB-991 is placedin abookcaseor cabinet,theremustbesufficient
clearance around the unit and ventilation of the cabinet to allow proper cooling.
KeeptheRB-991 awayfromradiators,heatregisters,stoves,or anyother
appliance that produces heat.
TheRB-991must be connected to a power supply only of the type and voltage
specified on therearpanel of theunit.
Connect the RB-991to the power outlet only with the supplied 2-pin polarized
power supplycable or anexact equivalent. D onot modifythesuppliedcablein
anyway.Do notattemptto defeatgroundingand/orpolarizationprovisions.The
cable should be connected to a 2-pin polarized wall outlet, matching the wide
bladeof theplug to thewide slot of thereceptacle.Do notuseextensioncords.
Do notroutethepower cordwhereit will becrushed,pinched,bentat severe
angles,exposedto heat,or damagedin anyway.Payparticularattentionto the
power cord at theplug andwhereit exitstheback of theunit.
Thepower cordshouldbe unplugged from thewall outletif the unitis to be left
unused for a long period of time.
Immediately stop usingtheRB-997 andhaveit inspectedand/orservicedby a
qualified service agency if:
• Thepower supplycordor plug hasbeendamaged.
Objectshavefallen into or liquidhasbeenspilledinto theunit.
• Theunit has been exposed to rain.
• Theunit shows signs of improper operation
• Theunit has been dropped or damaged in any way
Place the RB-991 on a fixed, level surface strong
enough to support its weight. Do not place the
RB-991on a moveable cart that could tip over.
or a foreign
immediately disconnect the power