Meec tools 014167 Bedienungsanleitung Seite 47

The spray jet pulsates.
Material runs on the
workpiece.
Too much spray mist
(overspraying).
Spray material in the
air hose.
Almost no material left in the
container.
The air filter is very dirty.
Excess flow.
Too far away from the object to be
sprayed.
Excessive flow of material.
The diaphragm is dirty.
The diaphragm is damaged.
Refill.
Replace.
Reduce the flow of material (-).
Reduce the gap.
Reduce the flow of material (-).
Clean the diaphragm.
Replace the diaphragm.
EN
47