Fnirsi 2D15P Bedienungsanleitung Seite 192

• Y Cursors: The Y cursors are horizontal dashed lines used to measure vertical voltage or current (with
current probe).
Y1 — Horizontal dashed line at the bottom of the screen (default). Can be manually moved anywhere
horizontally on the screen.
Y2 — Horizontal dashed line at the top of the screen (default). Can be manually moved anywhere
horizontally on the screen.
Y1-Y2 indicates the difference between two Y axes, displayed in the upper left information box.
• 1/d|X|: Represents the reciprocal of the time difference, displayed in the upper left information box.
▶3.1.9 Oscilloscope Specifications
Channel
Sample Rate
Analog Bandwidth
Memory Depth
Input Impedance
Dual Channel
500MSa/s
100MHz
10K, 100K, 1M
1MΩ