Fnirsi 2D15P Bedienungsanleitung Seite 191

• First, press the knob to control Cursor 1 (X1) moving
left/right.
• Press the knob again to control Cursor 2 (X2) moving
left/right.
• Then, press the knob to control Cursor 1 (Y1) moving
up/down.
七、 保修说明
• Finally, press the knob to control Cursor 2 (Y2) moving
up/down.
③ Understanding Cursors:
• X Cursors: The X cursors are vertical dashed lines used to measure horizontal time, including:
X1 — Vertical dashed line at the right side of the screen (default). Can be manually moved anywhere
vertically on the screen.
X2 — Vertical dashed line at the left side of the screen (default). Can be manually moved anywhere
vertically on the screen.
X1-X2 indicates the difference on the X axis, displayed in the upper left information box, adjustable
by turning the knob left/right.