Yamaha YRS-2100 Bedienungsanleitung Seite 47

Bluetooth
Note
If the problem occur other than the following message displayed on the display, check the connection of your Bluetooth component.
Message
Searching...
Completed
Canceled
Not Available
Connected
Disconnected
Not found
y
Resetting this unit
When the unit freezes, the problem may solve by resetting the unit.
To reset the unit, press key of this unit for more than 10 seconds.
Features
The Yamaha Bluetooth Wireless Audio
Receiver (such as YBA-10, optional) and
the Bluetooth component are in the process
of the pairing.
The Yamaha Bluetooth Wireless Audio
Receiver (such as YBA-10, optional) and
the Bluetooth component are in the process
of establishing the connection.
The pairing is completed.
The pairing is canceled.
The Yamaha Bluetooth Wireless Audio
Receiver (such as YBA-10, optional) and
the Bluetooth component are in the process
of the pairing.
The connection between the Yamaha
Bluetooth Wireless Audio Receiver (such
as YBA-10, optional) and the Bluetooth
component is established.
The Bluetooth component is disconnected
from the Yamaha Bluetooth Wireless
Audio Receiver (such as YBA-10,
optional).
The unit cannot find the Bluetooth
component while performing the pairing or
trying to connect to the Bluetooth
component.
Remedy
(When pairing)
– The pairing should be performed for this unit and
the Bluetooth component at the same time. Make
sure that the Bluetooth component is also a
pairing mode.
(When Connected)
– Make sure that the power of the Bluetooth
component is on.
– Check if the distance between the Yamaha
Bluetooth Wireless Audio Receiver and the
Bluetooth component is in 10 meters.
– The Bluetooth component and this unit have not
been performed pairing. Pairing the stations
again.
Troubleshooting
See
page
–
30
45
En