Sleep Timer/Auto Power Down Function; Settings For Each Input Source (Option Menu) - Yamaha YRS-2100 Bedienungsanleitung

Sleep timer/auto power down function

Use this feature to automatically set this unit to the standby mode
after a specified period of time.
Press SLEEP key repeatedly.
Switching the time it takes to switch to standby mode. The
SLEEP indicator (☞p. 47) flashes in the front panel display.
The SLEEP indicator in the front panel display lights up and the
2)
sleep timer is set.
Selectable item: Sleep 120 min., Sleep 90 min., Sleep
60 min., Sleep 30 min., AutoPowerDown, Off
■ Auto power down function
When AutoPowerDown is set, the unit is turned to standby mode
automatically after 10 minutes from the selected input source is
turned off or in standby mode. This function is useful to prevent
you from forgetting to turn off the unit.

Settings for each input source (Option menu)

Set according to each input (TV/HDMI1-3/INPUT1-3/DOCK).
Available menu items vary depending on the selected input.
1
Press input key (
the input you want to change the setting.
2
Press OPTION key.
The option menu is displayed on the front panel display.
;Volume Trim
3
Select the items by pressing
key, then press
4
Change setting value by pressing
key.
5
To exit the option menu, press
key.
y
2)
• The sleep timer setting is canceled if this unit is set to the standby
mode or "Off" is selected.
• When AutoPowerDown is set, SLEEP indicator does not light up
while the input source component is turned on.
y
3)
• If the unit is operated during the 10 minutes before entering standby
mode, the unit does not enter standby mode until 10 minutes after the
latest operation.
3)
, , , ) to select
/
ENTER key.
/
OPTION
Option menu items
The following menu items are provided for each input.
Input source
HDMI1-3 Volume Trim, Decoder Mode, Sur. Dec. Mode,
Signal Info
TV
INPUT1-3
Volume Trim, Sur. Dec. Mode, Connect,
DOCK
Disconnect, Pairing, Interlock
The option menu items are listed below. These settings are
applied to the currently selected input source. The default settings
are marked with "*".
■ Adjusting input level of each jack
(Volume Trim)
Adjust the input level for each jack to compensate for variations
in volume between different input devices.
Adjustable range: -6.0 dB to 0.0 dB* to +6.0 dB
■ Switching the audio signal to play back
(Decoder Mode)
Use to select digital audio signals for playback.
Selectable item: Auto*, DTS
Auto: This unit automatically selects the audio signal for
playback. Normally select this mode.
DTS: This unit plays back only DTS signal.
■ Setting the surround decoder (Sur. Dec.
Mode)
Refer to "Enjoying sound with your preference" (☞p. 21) for
details.
• AutoPowerDown cannot be selected when:
– analog (INPUT3) or DOCK is selected.
– TV or HDMI1-3 is selected and HDMI control function is on.
y
4)
For details on Interlock, refer to "Playing back iPod/iPhone (☞p. 29)".
For details on Connect, Disconnect and Pairing, refer to "Playing back
Bluetooth components (☞p. 30)".
Playback features
Menu items
4)
27
En