Dynamic Range Control; Volume Level Of Each Channel With Test Tones; Sound Out Setting; Sound Beam Output Configuration - Yamaha YRS-2100 Bedienungsanleitung

Sub menu: HDMI1-3
Manually adjust the audio output delay applied to signals input
from the HDMI IN jacks. This setting is effective only when
"AUTO LIP SYNC" is set to "OFF".
Adjustable range: 0 ms to 30 ms* to 300 ms
Sub menu: INPUT1/INPUT2/INPUT3
Adjust the audio output delay applied to signals input from the
INPUT1/INPUT2/INPUT3 jacks.
Adjustable range: 0 ms to 30 ms* to 300 ms

Dynamic range control

SOUND SETUP Dynamic Range Control
Use to adjust the dynamic range compression. Dynamic range is
the difference between the smallest sound that can be heard above
the noise of the equipment and the biggest sound that can be
heard without distortion.
Sub menu: Adaptive DRC
Select whether to automatically adjust the dynamic range in
conjunction with the volume level. When this function is set to
"ON", the dynamic range is adjusted as follows.
When the volume level is low:
Narrow the dynamic range. Loud sound is played back softer, and
soft sound which is hard to be listened to is played back louder.
When the volume level is high:
Widen the dynamic range. From soft sound to loud sound, source
sound is played back without adjusting volume.
On
Off
Input level
Volume : low
Selectable item: ON*, OFF
"ON": Adjust dynamic range automatically.
"OFF": The dynamic range is not adjusted automatically.
y
3)
• When set to "ON", "Dolby/DTS DRC" is automatically set to "Max".
• This setting is not available when the UniVolume is set to "ON".
y
4)
This makes the sound easier to hear when listening at low volume at
night, for example.
3)
On
Off
Input level
Volume : high
4)
Sub menu: Dolby/DTS DRC
Select the amount of dynamic range applied when this unit is
decoding Dolby Digital and DTS signals.
Selectable items: Min/Auto, Standard, Max*
Max: Outputs sound without adjusting the dynamic range of the
5)
input signals.
Standard: The dynamic range recommended for regular home
use.
Min/Auto:
(Minimum) Adjust the dynamic range for low volume or a quiet
environment, such as at night, for playing back bitstream signals
except for Dolby TrueHD signals.
(Auto) Adjust the dynamic range based on information from the
input signal when playing back Dolby TrueHD signal.

Volume level of each channel with test tones

SOUND SETUP CHANNEL LEVEL
Use to adjust the volume of each channel with test tones.
Sub menu:
Front L, Front R, Center, Surround L, Surround R,
Subwoofer
Adjustable range: -10.0 dB to +10.0 dB

Sound out setting

Sound beam output configuration

SOUND SETUP SOUND OUT
Sub menu: CHANNEL OUT, SURROUND
Use to configure the number of output channels (5.1ch/7.1ch/
Auto) or audio output method. For details, see "Changing the
audio output method for surround playback" (☞p. 23).
y
5)
"Adaptive DRC" is automatically set to "OFF" when the settings other
than "Max" is selected.
y
6)
When using My Surround function, Center, Surround L/R, Subwoofer
can be selected.
Setup menu
6)
37
En