Cleaning And Maintenance - Concept Rm6000 Bedienungsanleitung

EN
Preparing pasta
1. Insert the auger into the body of the grinder. Place the
extruder disc with the selected type of pasta on the axis of
the auger. Tighten the nut on the grinder (Fig. 1).
2. Fit and turn the grinder body anticlockwise so that the
safety catch secures this part firmly.
3. Fit the tray onto the grinder body.
4. Switch on the machine using the speed control button (8).
Select the speed as required.
5. Insert the dough into the inlet opening. Do not press
the blower with great force to avoid overloading the
appliance.
Note: It is recommended to hold the dough in the desired
shape with your hand to prevent it from tearing.
1. Bucatini
2. Spaghettoni
3. Penne
4. Pappardelle
5. Fettuccine
6. Ziti 1 2
Grater
IMPORTANT
DO NOT attempt to use this function while grinding, blending or chopping.
1. Cut the food into pieces. Approximately to the size of 20 × 20 × 60 mm so as to be easily inserted in the opening
of the container. Inserted food should not contain hard parts. Hard parts could cause the motor to stop. If the
motor stops, stop the appliance immediately and unplug it. Remove the entire grater assembly. If the motor stops
automatically, eliminate the cause of the stop. After the motor has cooled down, it is possible to continue.
2. Switch the appliance on by pressing the speed control button (8).
3. Place the food in the container exclusively using the stamper.
4. After grinding is completed, turn the speed control button (8) to the "0" position and remove the plug from the wall outlet.
5. Maximum grating time is 5 min. in continuous operation.
Assembly instructions for grater
• Assemble the grater (Fig. 1).
• Remove the front cover (Fig. 2).
• Place and turn the grater body counter-clockwise so that it clicks firmly into place (Fig. 3).
• Place the grated food container under the grater.
• Insert the plug into the wall outlet.
• Set the speed control button. Then place the food in the container and push it into the container with the stamper (Fig. 4).
1 2
60
1
3 4 5 6
3 4
• After use, switch off the appliance and unplug it.
• Press the release button located close to the grater body. Turn the grater clockwise and remove the entire grater assembly.
• Place back the front cover.
1. Fine vegetable grater
2. Coarse vegetable grater
3. Slicing grater
1
Heating function for perfectly risen dough
• Process the yeast dough.
• Leave the robot in the closed position, with the lid of the container adhering to the bowl.
• Use the speed control (8) to select position H.
• The heating element under the bottom of the bowl will heat up the bowl, resulting in a better and faster rise.
Tip: If you want to boost the rising even more, remove the kneading hooks after working the dough and cover the bowl
with a clean cloth instead of the lid. The hinged arm must be in the closed position.

CLEANING AND MAINTENANCE

• Unplug the power cord from the wall outlet before cleaning.
• Never immerse the base of the blender with a motor into the water!
• Do not use any sharp or abrasive cleaners.
• Only a damp cloth should be used to clean the outside of the cover.
Container and accessories
NOTICE
• The whisks and the container can be washed in the dishwasher.
• Other parts are not suitable for washing in a dishwasher.
• The parts that come into contact with food can be washed in soapy water.
• Before reassembling, let all the parts dry thoroughly.
• After drying, apply a small amount of vegetable oil to the surface of the container and the replaceable adapters of
the grinder.
EN
2 3
61