Cleaning And Maintenance - Concept RM3300 Bedienungsanleitung

EN
OPERATING INSTRUCTIONS
Note: Do not exceed the maximum continuous operating time (KB max), see the table of technical parameters.
Shredding blade
1. Insert the blade shaft into the glass bowl.
2. Insert the fine shredding blade, coarse shredding blade or slicing blade into the blade holder (disc).
3. Fit the blade holder (disc) onto the blade shaft (it must fit between the latches).
4. Place the top lid on the glass bowl (the locking parts must fit into the two handles on the glass bowl).
5. Insert the motor part into the top lid.
6. Insert the plug into the wall outlet.
7. Use the + and - buttons to adjust the speed level.
8. Press the ON/OFF button to switch the motor on or off.
9. Place the food into the feeding funnel of the lid using the pusher only.
10. When you have finished shredding, switch off the appliance with the ON/OFF button and unplug the appliance.
11. The lid can now be removed, to remove, pull apart the two locking parts on the top lid.
Chopping
1. Insert the chopping blade into the glass bowl.
2. Place the top lid on the glass bowl (the locking parts must fit into the two handles on the glass bowl).
3. Insert the motor part into the top lid (it must fit between the latches).
4. Insert the plug into the wall outlet.
5. Use the + and - buttons to adjust the speed level (1- 4).
6. Press the ON/OFF button to switch the motor on or off.
7. Place the food in the feeding funnel using the pusher only.
8. When you have finished shredding, switch off the appliance with the ON/OFF button and unplug it.
9. The lid can now be removed, to remove, pull apart the two locking parts on the top lid.

CLEANING AND MAINTENANCE

• Unplug the power cord from the wall outlet before cleaning.
• Never immerse the base of the blender with a motor into the water!
• Do not use any sharp or abrasive cleaners.
• Only a damp cloth should be used to clean the outside of the cover.
• The work bowl and the top lid must not be washed in a dishwasher!
0 RM3300
37