Supplementary Safety Instructions For Working With Wire Brushes; Working Safely - Parkside 479675 2410 Bedienungsanleitung

f) Do not switch the power tool
back on as long as it is in the
workpiece. Allow the cutting
disc to reach its full speed
before you carefully continue the
cut. Otherwise, the disc may jam,
jump out of the workpiece or cause
kickback .
g) Support panels or large
workpieces to reduce the risk
of the cutting disc jamming
and causing a kickback. Large
workpieces can bend under their
own weight . The workpiece must be
supported on both sides, namely in
the vicinity of the cut, and also at
the edge .
h) Be particularly careful when
making "pocket cuts" into
existing walls or other obscured
areas. The inserted cutting disc
may cut into gas or water pipes,
electrical wiring or other objects that
can cause kickback .
˜ Supplementary safety
instructions for working
with wire brushes
Special safety instructions for
working with wire brushes
a) Be aware that the brush can lose
wire bristles even during normal
operation. Do not overstress
the wires by applying excessive
pressure to the brush. The wire
bristles can easily penetrate light
clothing and/or skin .
b) Allow the brush to run at
working speed for at least one
minute before applying it to the
workpiece. Ensure that no one is
standing in front of or in line with
the brush during this time. Loose
pieces of wire could fly off during
the run-in period .
c) Aim the rotating steel brush away
from yourself. When working with
these brushes, small particles and
minute pieces of wire can fly off at
great speed and pierce skin .
˜ Working safely
Keep your workspace tidy.
Clutter in the work area can cause
accidents .
Take account of environmental
influences! Do not expose the
power tool to rain . Do not use
the power tool in wet or moist
environments . Ensure that your
workspace is adequately lit . Do not
use power tools where there is a risk
of explosion or fire.
Protect yourself from electric
shocks! Avoid body contact
with grounded surfaces (e .g .
pipes, radiators, electric cookers,
refrigerators and freezers).
Keep other people at a distance!
Do not allow other people, especially
children, to touch the power tool or
the cord . Keep them out of your work
area .
Store unused power tools safely!
Unused power tools should be
placed in a dry, high-up or closed-off
place out of the reach of children .
Do not overload your power tool!
You will work better and more safely
in the specified performance range.
Use the right power tool for the
job! Do not use low-performance
tools for heavy work . Do not use the
power tool for purposes for which
it is not intended. For example, do
not use a circular saw to cut tree
branches or logs .
GB 17