Stopwatch And Operating Hours Timer º º; Activating The Stopwatch (Timer); Stopwatch Signal (Race Duration) - Multiplex Profi Car 301 Bedienungsanleitung

8. Stopwatch and operating hours timer º º
The PROFI CAR 301 provides the following timing facilities:
v
Stopwatch (TIMER)
Start and stop the stopwatch using the handle button
function has already been switched on in the TIMER menu.
v
Stopwatch SIGNAL
Audible signal which can be used to signal the end of a practice run, for
example (max. 20 min.).
v
Operating hours timer (OPTIME)
This timer records the period of use of the transmitter battery, and it always
runs when the transmitter is switched on. You can erase the operating time
º
in the „
8.1.

Activating the stopwatch (timer)

This is the procedure:
§ Search for the menu point TIMER with the º button
§
Select ON or OFF with the digi-adjustor
Press any menu button (except
screen.
The stopwatch is operated by the handle button
Resetting the stopwatch to 0:
The stopwatch is reset to 00.0 by holding the handle button
than 3 sec. You can only do this when the operating screen is displayed.
8.2.

Stopwatch signal (race duration)

The stopwatch's signal function is useful for practice purposes: you set the signal
time to the planned race duration (max. 20 min.). Once you start the stopwatch (by
pressing the handle button) you will hear the following signals:
X short tone
X X long tone
This is the procedure for setting the signal time:
§
Search for the menu point SIGNAL with the
§
Rotate the digi-adjustor to adjust the flashing number
§
Press the handle button
next character
Press any menu button (except
"OPTIME menu.
º
) to return to the operating
every full minute,
every 10 sec. during the last minute
every second during the last 10 sec.
when the set time is elapsed
G
º
) to return to the operating screen.
G
(START/STOP).
º
to move the cursor to the
33
G
, provided that the
TIMER
G
pressed in for longer
SIGNAL
button
19: 5 9: 9
min : sec : 1/10
OFF