Niceboy RAZE 4 ORIGIN Bedienungsanleitung Seite 15

1. Turn both Niceboy RAZE 4 Origin loudspeakers on and make sure they are not
connected to any Bluetooth device (mobile, notebook etc.).
2. Briefly press "+" (2) and "-" (4) button on one of the loudspeakers. An acoustic
prompt will announce a successful connection of loudspeakers. An LED
indicator on one of the loudspeakers (1) will remain blue while on the other
loudspeaker the LED will flash blue - this means they are in pairing mode for
Bluetooth connection.
3. Now you can open the Bluetooth settings on your device. Select "Niceboy RAZE
4 Origin" in the list of available devices. An accoustic prompt will announce a
successful pairing.
PARAMETERS
Bluetooth version:
Supported codecs:
Supported profiles:
Power output:
Impedance:
Sensitivity:
Frequency range:
Bluetooth transmission distance:
Frequency FM:
Supported data devices:
Battery:
Battery life:
Waterproof level of protection:
RTB Media s.r.o. hereby declares that the type of radio equipment RAZE 4 ORIGIN
complies with Directives 2014/53 / EU, 2014/30 / EU, 2014/35 / EU, and 2011/65
/ EU. The full content of EU Declaration of Conformity is available on the following
websites: https://niceboy.eu/cs/podpora/prohlaseni-o-shode-mM38CtmYvX693lHvv
u4CWpk3vJGrvnC
5.0
SBC
A2DP, AVRCP, HFP
20W
6 Ω
>75dB
70 Hz– 18 kHz
10 meters
87.5MHz ~ 108MHz
micro SD card, max. 32GB
Li-Ion 2000 mAh
20 hours (at 50% volume)
IP67
15