Storage; Disposal And Recycling; Troubleshooting - Scheppach Dp16Sl Originalbetriebsanleitung

Spare parts and accessories can be obtained from our
Service Centre. To do this, scan the QR code on the
front page.

16. Storage

• Store the product and its accessories in a dark, dry
and frost-free place that is inaccessible to children.
• The optimum storage temperature is between 5 and
30˚C.
• Store the power tool in its original packaging.
• Cover the power tool to protect it from dust or moisture.
• Store the operating instructions with the power tool.

17. Disposal and recycling

Notes for packaging
The packaging materials are recy-
clable. Please dispose of packag-
ing in an environmentally friendly
manner.
Notes on the electrical and electronic equipment
act (ElektroG)
Waste electrical and electronic equipment
does not belong in household waste, but must
be collected and disposed of separately!
• Used batteries or rechargeable batteries that are
not installed permanently in the old device must be
removed non-destructively before disposal! Their
disposal is regulated by the battery act.

18. Troubleshooting

WARNING: Always switch the machine off and pull the plug out of the socket prior to troubleshooting.
Fault
The axle moves back into
its starting position too
quickly or too slowly
The chuck always comes
loose from the spindle de-
spite continued fastening
40 | GB
Possible cause
Incorrect setting of the spring pre-ten-
sion
Dirt, grease or oil on the spindle or the
inside of the chuck
www.scheppach.com
• Owners or users of electrical and electronic devices
are legally obliged to return them after use.
• The end user is responsible for deleting their per-
sonal data from the old device being disposed of!
• The symbol of the crossed-out dustbin means that
waste electrical and electronic equipment must not
be disposed of with household waste.
• Waste electrical and electronic equipment can be
handed in free of charge at the following places:
- Public disposal or collection points (e.g. municipal
works yards)
- Points of sale of electrical appliances (stationary
and online), provided that dealers are obliged to
take them back or offer to do so voluntarily.
- Up to three waste electrical devices per type of
device, with an edge length of no more than 25
centimetres, can be returned free of charge to
the manufacturer without prior purchase of a new
device from the manufacturer or taken to another
authorised collection point in your vicinity.
- Further supplementary take-back conditions of
the manufacturers and distributors can be ob-
tained from the respective customer service.
• If the manufacturer delivers a new electrical device
to a private household, the manufacturer can ar-
range for the free collection of the old electrical de-
vice upon request from the end user. Please contact
the manufacturer's customer service for this.
• These statements only apply to devices installed
and sold in the countries of the European Union
and which are subject to the European Directive
2012/19/EU. In countries outside the European Un-
ion, different regulations may apply to the disposal of
waste electrical and electronic equipment.
Remedy
Set the pre-tension; see "Setting the spindle
return spring"
Use a household cleaning agent to clean the
surface of the spindle and the sprocket chuck,
see "Installing the sprocket chuck"