Security Advices - Spl Transient Designer 2440 Bedienungsanleitung

Security Advices

Before starting up the device:
• Read thoroughly and follow the security
advices.
• Read thoroughly and follow the manual.
• Observe all warning instructions on the
device ad on your SEPIA rack.
• Please keep the user manual as well as the
security advices in a safe place for future
references.
• Please refer to and heed the safety and
assembly instructions of your SEPIA rack.
Warning
Always follow the security advices listed below to
avoid serious injuries or even deadly accidents
due to electric shocks, short circuit, fire or other
dangers. The following are examples of such
risks and do not represent an exhaustive list:
Do not open
This device contains no user-serviceable
parts. Do not open the device or attempt to
disassemble the internal parts or modify them in
any way. If it should appear to be malfunc-
tioning, turn off the power of your SEPIA rack
immediately, unplug the power cord from the
mains socket outlet and have it inspected by a
qualified professional.
Water warning
Do not expose the device to rain, or use it near
water or in damp or wet conditions, or place
anything on it (such as vases, bottles or glasses)
containing liquids which might spill into any
openings. If any liquid such as water seeps into
the device, turn off the power of your SEPIA rack
immediately and unplug the power cord from
the mains socket outlet. Then have the device
inspected by a qualified professional.
6
Fire warning
Do not put burning items, such as
candles, on the unit. A burning item may
fall over and cause a fire.
Lightning
Before thunderstorms or other severe weather,
disconnect your SEPIA rack from the mains
socket outlet; do not do this during a storm in
order to avoid life threatening lightning strikes.
Similarly, disconnect all the power connections
of other devices, antenna and phone/network
cables which may be interconnected so that
no damage results from such secondary
connections.
If you notice any abnormality
When one of the following problems occur,
immediately turn off the power switch and
disconnect the electric plug of your SEPIA rack
from the mains socket outlet. Then have the
device inspected by a qualified professional.
• The device emits unusual smells or smoke.
• An object has fallen into the unit.
• There is a sudden loss of sound during the
use of the the device.
Transient Designer – SEPIA