•
Place the freezer door from top
to bottom, take out the spacer
from the attached plastic bag
and put it on the axle hole of
another side of the freezer door.
•
Fix the middle hinge with screws
and install 2 hole caps.
•
Put the refrigerating door on the
middle hinge , assemble the top
hinge on another side ,fix the
hinge cover on the top hinge
and fix hole cap,as below
pictures shows.
NOTE
NOTE: The picture above is only for
will depend on the physical product or
statement by the distributor.
2.8 LEVELING FEET
Before operation of accessories,
it shall be ensured that the
refrigerator is disconnected from
power.
Before adjusting the leveling feet,
precautions shall be taken to
prevent any personal injury.
2) Schematic diagram of the
leveling feet
a. Turn the feet clockwise to raise
the refrigerator;
b. Turn the feet counterclockwise
to lower the refrigerator;
c. Adjust the right and left feet
based on the procedures above to
IMPORTANT:
The picture above is only for reference.
the physical product or statement by the
distributor
EN-14