2.6 FUNCTIONS
Display
Once initially powered on, all LED lights turn on for 3 seconds, and then
the refrigerator runs at the default setting (LED2 light is on).
In case of a failure, the corresponding LED blinks.
In case of no failures, it shows the actual temperature setting of refrigerator.
Fault Code
LED2 / LED4 flashing
LED3 / LED1 flashing
LED1 / LED2 / LED4 flashing
Temperature setting
Each time the temperature setting button A is pressed once, the temperature
setting changes one time. After the temperature setting has been completed,
the refrigerator will run according to the set value after 30s.
The shift regulation is:
Super freeze mode
Long press temperature setting button for 5s, it will enter Super freeze mode
after 30s, and LED 3 and LED 4 turn on at the same time.
After running for 40 hours at Super freeze mode or the setting button is
pressed, it will quit the Super freeze mode, then go back to the previous setting.
Super cool mode
Long press temperature setting button for 3s, it will enter Super cool mode
after 30s, and LED 1 and LED 2 turn on at the same time.
After running for 6 hours at Super cool mode or the setting button is pressed,
it will quit the Super cool mode, then go back to the previous setting.
Recommended setting: Refrigerated chamber 4°C and LED 3 light will turn on
at the recommended setting.
ATTENTION
The super freeze function is designed to maintain the nutritional value of the food in the freezer. It can
freeze the food in the shortest time. If a large amount of food is frozen at one time, it is recommended that
the user turn on the super freeze function and put the food in. At this time, the freezing speed of the
freeze
of the food, and facilitate storage.
Button
A Temperature setting of refrigerator
compartment
Display
1
LED 1 : 8 °C
2 LED 2 : 6 °C
3 LED 3 : 4 °C
4 LED 4 : 2 °C
Fault Description
Temperature sensor failure of refrigerator room
Ambient temperature sensor error
Defrost sensor fault in refrigerating chamber
EN-12