BURG WÄCHTER secuENTRY easy PINCODE Montageanleitungen Seite 38

Dismantling of secuENTRY easy keypad from wall holder
• Remove the housing cover on the bottom side by loosening the
2 screws (Tx 8).
• Pull the battery compartment lid downwards until it disengages and
replace the batteries.
• Press the latch using a narrow tool (e. g. flat-bladed screwdriver)
downwards and slide the keypad upwards.
Interference from Bluetooth devices
Bluetooth devices use the same frequency band (2.4 GHz) as WiFi devices.
This can cause interference leading to errors or even to communication
failure. In such case, any devices not required should be kept disconnected
from power.
40 | English secuENTRY easy
W
In
pro
ne
a v
do
W
fro
set
of
D
De
Ple
Sh
tha
be