General Information - Jarolift Basic Original Massanleitung

Dear customer!
We recommend printing out this information on measuring.
Here you will find everything you need to know to measure your custom-made roller shutters correctly and order them correctly.
Please note the following special features first:
1.
Take the measurements for your roller shutter from the
outside. Looking at your window from the outside, please
enter your order measurements into the configurator!
2.
Also specify the operating side as seen from the outside!
3.
All measurements are given in millimeters.
1 centimeter is 10 millimeters.
10 centimeters is 100 millimeters.
100 centimeters are 1 meter or 1,000 millimeters.
4.
We supply the following mounting materials with every
roller shutter:
Countersunk screws with countersunk holes, including
PVC cover caps.
In the configurator, you can select the following moun-
ting surfaces and receive the following screw lengths:
Mounting on masonry:
Drilling on the side:
Drilling on the front:
Please note that dowels are not included!
Mounting on plastic:
4,5 x 35 mm screws
Mounting on wood:
4,5 x 45 mm screws
If you have any questions, please call us!
Phone +49 8178 / 932 932
Screws 4.5 x 60 mm
Screws 4.5 x 70 mm

GENERAL INFORMATION

10 10