General Information - Jarolift Basic Original Massanleitung

GENERAL INFORMATION

Dear customer!
We recommend printing out this information on measuring.
Here you will find everything you need to know to measure your custom-made roller shutters correctly and order them correc-
tly.
Please note the following special features first:
1.
Take the measurements for your roller shutter from the outside. Look-
ing at your window from the outside, please enter your order measu-
rements into the configurator!
2.
Also specify the operating side as seen from the outside!
3.
All measurements are given in millimeters.
1 centimeter is 10 millimeters.
10 centimeters is 100 millimeters.
100 centimeters are 1 meter or 1,000 millimeters.
4.
We supply the following mounting materials with every roller shutter:
Countersunk screws with countersunk holes, including PVC
cover caps.
In the configurator, you can select the following mounting surfaces
and receive the following screw lengths:
Mounting on masonry:
Drilling on the side of the leg: 4.5 x 60 mm
Drilling on the front side: 4.5 x 70 mm
Please note that dowels are not included!
Mounting on plastic:
Screws 4.5 x 35 mm
Mounting on wood:
4.5 x 45 mm
If you have any questions, please give us a call!
Phone +33 187 65 00 23
10