Operation; Before Startup - Kärcher AD 3.000 Bedienungsanleitung

Accessory mount
The accessories compartment allows the
storage of suction pipes and suction noz-
zles on the appliance.
(see description / illustration
Steering roller
The steering rollers are located in the com-
partment when the appliance is delivered.
These must be attached prior to starting up
the appliance.
(see description / illustration
Flat fold filter with frame
(already installed in the appliance)
Caution
 Filters and their frames must always be
inserted during operation.
(see description / illustration
Filter intake
 Filter intake is located/sits in filter basket.
Filter basket
(with coarse dirt filter)
Suction hose with handle
 Slide the suction hose into the connec-
tion, it will lock into place.
(see description / illustration
In order to disconnect it, push down
with your thumb and pull the suction
hose out.
14
*AD 3.200
 Connect both suction pipes and con-
)
*AD 3.200
 Use the appropriate insert for vacuum-
)
 Do not use the floor nozzle to vacuum
- )
 Illustration
 Illustration
)
– 8
EN
Suction tubes 2 x 0.5 m
nect them to the suction hose.
(see description / illustration
Floor nozzle
(with insert)
ing on hard surfaces and carpets.
(see description / illustration
Hard surfaces: Use the insert with 2
bristles.
Carpeting: Work without an insert.
Caution
ashes.

Operation

Always work with the flat fold filter
inserted.

Before Startup

Remove the appliance head and the fil-
ter basket. Mount loose parts deliverd
with appliance prior to start-up.
Insert filter basket.
Insert and lock the appliance head.
)
)