Auto Mode - Levoit Core 600S Smart Bedienungsanleitung

USING YOUR PURIFIER (CONT.)

Auto Mode

Auto Mode uses AirSight Plus™, a smart
laser dust sensor inside the air purifier, to
adjust the fan speed automatically based
on air quality. For example, if the air quality
is bad, the fan will automatically be set to
high speed.
Note:
•
The air purifier will take 5 seconds
to detect the air quality each time it
is turned on. During this time, the air
quality indicator rings will be blue. After
5 seconds, the air quality indicator
rings will change colour based on the
detected air quality.
•
Auto Mode does not use the turbo fan
speed.
•
The VeSync app also supports
additional auto modes: Quiet Auto
Mode, Efficient Auto Mode, and ECO
Auto Mode (see page 14).
Indicator Colour
Blue
Green
Orange
Red
Air Quality Indicator Chart
Air Quality Auto Mode Fan Speed
Very Good
Good
Moderate
Bad
Sleep Mode
Low
Medium
High
PM2.5 Range
0–12 ug/m 3
13–35 ug/m 3
36–55 ug/m 3
> 55 ug/m 3
EN
11