Vesync App Setup; Using Your Purifier; General Operation; Memory Function - Levoit LV-PUR131S Bedienungsanleitung

EN

VeSync App Setup

1. Scan the QR code, or download the VeSync app from the
Apple App Store or Google Play Store.
2. Create an account and follow the in-app instructions to
finish setting up your air purifier. For more information, see
the extended digital manual (QR code on page 2).
NOTE: You can use the VeSync app to connect your air purifier to
Amazon® Alexa™ or Google Assistant™.
U S I N G YO U R P U R I F I E R

General Operation

1. Press to turn on the air purifier. The air purifier fan
will start automatically at low speed.
2. Optionally, press
also select Auto or Sleep Mode, or create a timer.
NOTE:
• You can use the VeSync app to control all these
functions, and more. For full instructions, see the
extended digital manual (QR code on page 2).
• For best results, run the air purifier at maximum
speed for 15–20 minutes before using a lower
speed or Auto Mode.
• To effectively clean air, keep windows closed while
the air purifier is operating.
3. Press to turn off the air purifier.

Memory Function

When the air purifier is plugged in, it will remember its
programmed settings when turned off, and will resume
these settings when turned back on.
10
[Figure 2.1]
to increase fan speed. You can
Available on the
App Store
Figure 2.1

Auto Mode

Auto Mode uses the sensor inside the air purifier to adjust
the fan speed automatically based on air quality. For
example, if the air quality is bad, the fan will automatically be
set to high speed. See chart.
1. Press to turn on Auto Mode.
2. Press again to exit Auto Mode. Pressing
will also exit Auto Mode.
Auto Mode Chart
Color Air Quality
Red
Yellow Moderate
Green
Blue Very Good

Automatic Shutoff

As a safety feature, the air purifier will automatically turn off
if the back cover is removed.
GET IT ON
Google Play
or
Fan Speed
Bad High
Medium
Good Low
Sleep Mode