Emissions; Sources Of Danger; Authorised Operators; Proper Usage - Tennant Kobra 4100 Betriebsanleitung

kobra 4100
1.8

Emissions

The A-evaluated equivalent continuous sound
pressure level of this machine is 69 dB (A) in
the standard version, 67 dB (A) in the 100-Ah
version
1.9

Sources of danger

When the machine is at a standstill, the brush
module must immediately be switched off so that
the floor covering is not damaged. Move care-
fully over thresholds and steps – the brush mo-
dule or the suction lips may become damaged.
Tilt the machine and move it using the two rear
transportation wheels until the threshold has
been crossed. The machine is only intended for
use on level surfaces with a maximum incline of
up to 2%.

1.10 Authorised operators

The machine must only be used by persons who
have been provided with instruction regarding its
use and who have been expressly commis-
sioned with its use. These persons should be at
least 18 years old.

1.11 Proper usage

Autoscrubbers are exclusively intended for wet-
cleaning hard, waterproof floor coverings in the
interior of buildings. The adherence to commis-
sioning, operating, maintenance and repair re-
gulations is a prerequisite of proper usage. The
operating personnel must be informed of these
regulations. All other usage is regarded as im-
proper. The manufacturer cannot be held liable
for damage which occurs as a result of this; the
risk of this is borne solely by the user. The ma-
chines may only be used, maintained and repai-
red by persons who are familiar with this and
have been informed of the risks. The relevant
accident prevention regulations and other gene-
rally recognised safety-technical, industrial me-
dicine and legal road traffic regulations must be
complied with. Unauthorised amendments to the
machine preclude any liability on the part of the
manufacturer for damage which occurs as a
result of this.
Home

1.12 Product liability

The operating personnel is expressly informed
that the machine must only be used according to
the instructions. If these instructions are contra-
vened, this is the sole responsibility of the oper-
ating personnel.
If original replacement parts are not used, un-
authorised interventions or technical amend-
ments are carried out, this is also the responsibi-
lity of the operating personnel. The manufacturer
cannot accept any liability for this.
18
Find... Go To..
1 Safety