Start-Up - HomeMatic HmIP-STHO Montage- Und Bedienungsanleitung

and turn the screws into the plugs (see fig. 4).
• Do not yet place the cap (A).
6

Start-up

Please read this entire section before starting to
use the device.
First set up your Homematic IP Access Point via
the Homematic IP app to enable operation of
other Homematic IP devices within your system.
For further information, please refer to the
operating manual of the Access Point.
You can connect the device either to the Access
Point or to the Homematic Central Control Unit
CCU2. For detailed information, please refer to the
Homematic IP User Guide, available for download
in the download area of www.eQ-3.com.
To integrate the temperature and humidity sensor into
your system and enable it to communicate with other
Homematic IP devices, you must teach-in the device to
your Homematic IP Access Point first.
Start-up
31