Dometic B1600 PLUS Montageanleitung Seite 34

Installation
See fig. 9
➤ Make an opening on one side in order to feed through the electrical power
supply cable.
➤ Feed the 230 Vwcable through the opening into the vehicle interior.
If the lighting should be switched on without the use of a 230 Vwvoltage
supply:
➤ Connect the cable with the positive terminal and the negative terminal of
the vehicle battery.
➤ Feed the 12 Vg cable through the opening into the vehicle interior.
8.5 Installing the roof air conditioner
A
NOTICE! Risk of damage
Observe the structural strength of the roof of the vehicle. The roof
of the vehicle must be able to bear the weight of the roof air con-
ditioner. The roof must not be indented or deformed by the weight
of the unit, even over a longer period of time.
See fig. 0
➤ Lift the roof air conditioner onto the roof of the vehicle.
➤ Position the roof air conditioner over the installation opening.
Observe the direction of travel.
Attaching the roof air conditioner
See fig. a
➤ Position the roof air conditioner into the mounting opening using the
conical noses.
32
B1600PLUS, B2200, B2600
EN